Page 1 of 1
What are the difference between 02-04 S & 05+ S sensors?
Posted: Sun Dec 03, 2006 6:40 pm
by Garrett_si
In this article
http://www.hondata.com/dynok20-05rsx.html
they said some sensors are different, emissions, VSS ....
more infos about those sensors?
Posted: Mon Dec 04, 2006 10:57 am
by Spunkster
What exactly are you trying ot find out?
Posted: Mon Dec 04, 2006 4:30 pm
by Garrett_si
Spunkster wrote:What exactly are you trying ot find out?
I want to know if the TPS, MAP, CKP, TDC, CPS, are all the same?
and what is really different from the 02 sensor?
Posted: Mon Dec 04, 2006 4:41 pm
by Hondata
The only difference is the o2 sensor, the speed sensor and some of the ECU wiring. The engine itself between 02-04 and 05-06 with exception of the cams. TPS, MAP, CKP etc etc are all the same. The transmission has the different final drive and a different speed sensor.
Posted: Mon Dec 04, 2006 4:43 pm
by Garrett_si
fine but I don't understand this
Hondata makes hardware modifications to the 2002-2004 ECU enable it to work with the different sensors and actuators found on the 2005-2006 ECU. After these modifications the ECU will not function correctly on a 2002-2004 RSX.
taken here :
http://www.hondata.com/dynok20-05rsx.html
Posted: Tue Dec 05, 2006 9:54 am
by Hondata
The modifications are for the speed sensor and the differences in wiring between the 02-04 and 05-06.
Posted: Tue Dec 05, 2006 4:04 pm
by Garrett_si
Hondata wrote:The modifications are for the speed sensor and the differences in wiring between the 02-04 and 05-06.
so the ECU still the same
Posted: Tue Dec 05, 2006 6:04 pm
by Spunkster
No, the ecu's are completely different...this is why to use a K-pro in an o5/06 you must use an 02-04 ecu that is modified.
Posted: Tue Dec 05, 2006 6:18 pm
by Garrett_si
Spunkster wrote:No, the ecu's are completely different...this is why to use a K-pro in an o5/06 you must use an 02-04 ecu that is modified.
I mean the K-pro use for 2002-04 and 2005-2006 still the same
It's a 2002-04 ECU with the K-board inside
but it's the same
Posted: Wed Dec 06, 2006 10:21 am
by Spunkster
The k-pro is the same, but the 02-04 ecu used in an 05-06 has been further modified to work.
Posted: Wed Dec 06, 2006 3:47 pm
by Garrett_si
Spunkster wrote:The k-pro is the same, but the 02-04 ecu used in an 05-06 has been further modified to work.
OK, and what are the modification Hondata made?
this is what I want to know :P
I want to know whicj part or sensor on the car, are responsible of using a 2002-04 ECU modified
Posted: Thu Dec 07, 2006 10:38 am
by Hondata
The ECU has been modified to work with the 05 sensors and vehicle wiring. We are not going to release details of what we do - this is a trade secret.