Hondata

Posted: **Mon Nov 06, 2006 10:14 am**

i juss bought s300 and had it dynoed and tuned. bout 2 weeks ago. and last weekend i was goin to change my launch control to higher rpm, after i turn on the car and started datalogging, it froze on me after 1 min or so and error codes shows up. o sensor 1 and 2, ignition, injectors, etc... no check enjine light... car is driving normal and sarts... the light inside the ecu is a steady green and red...

the problem again is after 1 min of datalogging, the data logging window freez and error codes showz up, the light inside the ecu is green and red, steady lit... please help....

Posted: **Mon Nov 06, 2006 1:53 pm**

Has J12 been cut and who socketed the ecu?

Posted: **Mon Nov 06, 2006 1:56 pm**

i dunno what a j12 is... and if you know the shop called modacar in livermore... i forgot his name his white guy thoe...

Posted: **Mon Nov 06, 2006 2:04 pm**

You should take it back to your dealer and have them check the socketing.

Posted: **Mon Nov 06, 2006 2:06 pm**

ok thanx

Hondata

s300 datalogring freez and error codes problems... help...

s300 datalogring freez and error codes problems... help...