Page 1 of 1
s300 datalogging problem
Posted: Sun Oct 15, 2006 9:31 am
by jbcivic03
I just got a s300 install on to a p72. The local shop was trying to tune it but wont datalog at all. It prevously had the older hondata systems. Does anybody know what may be causing this?
Posted: Sun Oct 15, 2006 11:21 am
by Hondata
Follow this guide:
http://www.hondata.net/forum/viewtopic.php?t=5226
If you can upload but not datalog then it is the socketing.
Posted: Sun Oct 15, 2006 7:53 pm
by jbcivic03
seems to be the socketing what can i do to fix it?
Posted: Mon Oct 16, 2006 9:46 am
by Spunkster
Check all the soldering and make sure all the components are in place. I would suggest sending the ecu to us and paying to have it resocketed.
http://www.hondata.com/ecusocketinginfoform.html
Posted: Mon Oct 16, 2006 11:21 am
by jbcivic03
I had it install at redline perfomance in arlington tx. They are one of your dealers. Do you think they will be able to fix it. If i send it to you would you be able to test it before you send it back and how long will the repair take?
Posted: Mon Oct 16, 2006 4:16 pm
by Spunkster
Your first step should be to contact the dealer.
Posted: Tue Oct 17, 2006 1:28 am
by uglyasscivic1
Check that J12 is removed.
Posted: Tue Oct 17, 2006 9:28 pm
by jbcivic03
If i send it how long would be before i get it back if its over night delivery? O and uglyasscivic1 what is j12?
Posted: Wed Oct 18, 2006 9:29 am
by Spunkster
Turn around time, if the ecu can be repaired is 1-2 days.
Posted: Wed Oct 18, 2006 1:10 pm
by jbcivic03
Whats is the address that i should send it to?
Posted: Wed Oct 18, 2006 2:32 pm
by Spunkster
What did your dealer say?
The address at
www.hondata.com :
Hondata, Inc.
386 Beech Ave
Unit B2
Torrance, CA 90501
You must also include the socketing from at
http://www.hondata.com/ecusocketinginfoform.html
and include the cashier's check or money order.