Page 1 of 1
aftermarket cams for 06 si comp. w/ reflash?
Posted: Sun Sep 17, 2006 10:53 am
by 06civicsi
i was woundering if there are any aftermarket cams that are comp.with the reflash for the 06 si?
also i heard that the tsx cams would be the best.is this true?
Posted: Mon Sep 18, 2006 8:46 am
by Hondata
This is not something which we have tested. Because the Si uses an AFM the fuel tables would be largely self correcting for cams, however the VTC timing would not be optimal.
Posted: Mon Sep 18, 2006 6:10 pm
by 06civicsi
so if i would us the toda high pwer cams spec b and the vtc killer cam gears would that take care of the vtc timing probl.?and the afm would adjust to the new cams?
Posted: Tue Sep 19, 2006 8:42 am
by Hondata
No. The VTC Killer cams gears will not work with a stock ECU.
Posted: Tue Sep 19, 2006 9:41 am
by 06civicsi
is hondata going to test any cams with the 06 si? pref. toda would be the best to test with! to see if any would work with the reflash?
Posted: Tue Sep 19, 2006 12:33 pm
by Hondata
It is up to the cam manufacturer to drive any reflash development for their products.
Posted: Thu Sep 21, 2006 2:35 pm
by legendman
Hondata wrote:It is up to the cam manufacturer to drive any reflash development for their products.
I heard you guys were working with IPS, any details you could give us.
This post contains hearsay (Automatically inserted as per forum rule #6)
Posted: Thu Sep 21, 2006 8:25 pm
by 06civicsi
i know they are working with toda.
This post contains hearsay (Automatically inserted as per forum rule #6)
Posted: Fri Sep 22, 2006 9:18 am
by Spunkster
I heard they were bought by the Japanese...
This post contains hearsay (Automatically inserted as per forum rule #6)