Hondata

could i possibly get a calibration for a prelude h22 vtec with

750cc injectors please

thank u

its a stock h22 with RC Engineering Saturated Fuel Injectors and getting rdy for boost, but want to get the vehicle running with the injectors first. can anybody help me out?

do i just have to put stock injector size to 310 and current injector size to 750 and the hondata will change settings but allow vehicle to run at stock setup?

im just curious why this is not working out for me here

ive set stock injector to 310
and current injector size to 750

but its running way to rich and will not allow vehicle to rev anyware past 3000 to 3500 rpm. it hesistates very bad, and tunes of fuel coming from tail pipe....

am i missing anything here?

my stock h22 (well almost) came with 290cc injectors, are you sure yours came with the 310's, i know some types of H22 had them but it could explain how your running rich.

it is a jdm h22a its a 94 engine. but i can not find anywhere a listing or information on stock injector would be. ive read, 235, 240, 290, 310 and even 330. so i am not having to much luck with this at all. if anybody can help that would be great.

i think your injectors are 345cc peak and hold, i think that was what came in them up to '96. try it and see if it works but you really should use your wideband.