Hondata

i have a bug with software where when datalogging with s300 unit and you update the ECU , datalogger logs the wrong AFR (10.00) when the PLX-M300 is still logging the correct AF ratio.

the only way around this i can find is turn off car and it all working again.

Any ideas on this bug and when it will be fixed ?

Read this before posting

Which input have you connected the M300 to? Can you provide a datalog?

When reporting any s300 problems, please include:

- the calibration
done as per document http://www.hondata.com/techplxwiring.html

- a datalog of a problem
will attach in the next few days.

- what sort of vehicle you have
99 prelude

- what sort of ECU you are using
P28

- anything about the car which has been modified from stock which may
stock except custom exhaust

- a specific description of the problem
when datalogging AFR randomly reported by hondata = 10.0 even though the PLX says otherwise.

Then after certain time will start loggin normally again ( AFR in hondata matches the PLX M300.