Hondata

just want to share this with hondata and everyone else..

setup: 2003 Accord sedan with rsx ecu kpro

i build a custom harness from scratch..it took me about 2 days spending about 1 to 2 hours each day..but anyway at the initial setup..i only hook up the basic wiring...at that point..the rpm, speedo, coolant gauge, and a/c wasn't working...but as it progress each day i got more and more of them to work by perfecting the harness..so now its complete and working..everything is working except the k-line (data link)..i'm stilling trying to figure out to approach it..but at this point its not the most important thing right now. the car started up and drove perfectly..

So everything in the vehicle works, how important is the K-Link? Have you tuned the car with K-Pro yet and do you have schematics on how you made this work?

@cstyleaccord: could you share with us the updated progress on you accord/k-pro project?

Please supply an email or MSN contact. I am very interested in the harness you built.



Thanks, C.

carlettosan wrote:@cstyleaccord: could you share with us the updated progress on you accord/k-pro project?

Please supply an email or MSN contact. I am very interested in the harness you built.



Thanks, C.

email: dekhmerone@yahoo.com
AIM: dekhmerone
MSN: c_sieng@hotmail.com