Hondata

With version 1.2.1.6 is is apparent that people generally only update their software every 6 - 12 months. This is causing problems when we sent out new systems with more recent software than people have. To help we've added a function to automatically check for new versions.

? Fixed problem where PRA ECU would not go into open loop when closed loop was disabled.
? Added automatic update check.
? Increase vss output smoothing.

Use the built in 'check for updates' function in KManager.

heard some people complain of slow uploads/datalogging frame rate with 1.2.1.6, were those isolated instances?

I'm still on 1.2.1.1 because everything works perfectly more me and I get 45-50 fps with an old 600 MHz laptop :)

so v16 kal and communcation problems were only with newer ecu's with newer kal and peps using older ver?

You should be using the newest version of software.

The problems reported were not from the software updates.

thanks

I loaded 1.2.1.6 up on my laptop (that came with a friends new k-pro he JUST got today) and it crashes every time I try to start it. I had 1.2.1.somethingelse before that didn't work with the new k-pro firmware it seems, however it didn't crash 100% of the time at launch.

I'm not sure if this is an issue you're going to be addressing or were aware of -- it was on windows 2000, an old laptop I use only for tuning. I will try the 1.2.1.7 on the laptop and see if it works or if the problem persists. I can't move to XP, so hopefully that's not the problem ;).

I have another laptop with xp, but it has had a history of not wanting to stay connected to k-pro.

Wayne

no problems as normal with the v17 upgrade - uploading kal's is a little slower on my older machine (running xp on a ibm thinkpad 600e, 300mhz pen ii, 128k ram) like some peps reported.

how is download speed on a faster machine? i'm waiting like 1-2min to download.

see post below - uploading is faster than ever with this version...

I am reporting this problem I have seen with 1.2.1.6 & 1.2.1.7 - I have a datalog which is 24 min. long When opening in the 1.6 & 1.7 versions, it seems to run really slow especially selecting a time point in the window. I think the issue is that the window is trying to show all the data at once(it puts all the data in the window). In 1.2.1.5 version, I did not have this issue - I think it showed the datalog as a ~20 sec per window frame. I can continue to see the rest by scrolling to the right. This was a pretty fast algorithm. However, now it seems you want to see everything at once.

2nd. is that when datalogging 1.6 version for around 20 min. (I think), the tool crashes. I do not know what the reason is. I have 1 gig memory 1.8Ghz ( sony vaio fj270).

I tried uploading, but there is a problem (the site says "no post mode".)

Please take a look into this.

fvang

Please take a look.

Fvang

well I've been a dumb ass, i tried uploading a kal w/ all windows closed like when data logging and shit is fast as hell - can't believe i just figured this out. sob...