Page 1 of 1
First Time Using Hondata/Can't Get IT TO Idle Smoothly
Posted: Sun May 21, 2006 2:38 pm
by The Jacko
My buddy just got the s300, I uplaoded on of the calibration maps into the ECU. I changed his injector sizes. I tried to pour fuel but still nothing. For some other reason the car idled between 1000 to 1250rpm, but it does that in column five and six. Also in some spots the ignition looks really low to me. I am in desperate need of help. I would like to show the map but I could not download it as an attachment. Would someone tell me how to do it.
Posted: Mon May 22, 2006 9:53 am
by Spunkster
Is this with the car fully warmed up that it has the high idle? What does the car idle at with teh IAC disconnected?
You just choose the location of the file you wan tto attach where it says browse, then after finding the file double click it and then submit.
Posted: Mon May 22, 2006 4:31 pm
by The Jacko
I disconnected the IAC and the car wants to stall. Still working on posting the map.
Posted: Mon May 22, 2006 4:54 pm
by Spunkster
set the map properly per the Helms manual instructions before going any further. Then you can make adjustments to the idle controll slider and the water temp idle tables.
Posted: Mon May 22, 2006 7:54 pm
by The Jacko
:? sorry,what is the Helms manual and where can i get it :oops:
Posted: Mon May 22, 2006 11:53 pm
by alex
what map sensor are you using?
Posted: Tue May 23, 2006 9:16 am
by Spunkster
Helms manual is the factory service manual
www.helminc.com
Posted: Tue May 23, 2006 9:11 pm
by The Jacko
alex wrote:what map sensor are you using?
It's a stock map sensor
Posted: Tue May 23, 2006 9:12 pm
by The Jacko