Hondata

Posted: **Wed May 17, 2006 2:38 pm**

I have a jackson racing supercharged b16 and trying to get rid of the fmu and fuel enrichment relay and was going to get a set of 440's but was told to go bigger just incase...so what do i get?

Posted: **Wed May 17, 2006 4:56 pm**

440's a map relocator and the s300 will be all you need. You can get the map relocator through Jackson Racing.

Posted: **Wed May 17, 2006 7:14 pm**

i have the map relocator i am not using it because the box got fried but i guess that doesn't matter since i will be using hondata right?

Posted: **Thu May 18, 2006 9:09 am**

You will have to remove all the Jackson Racing electronics. More details can be found at http://www.hondata.com/tech_jrscinstall.html

Posted: **Thu May 18, 2006 9:35 am**

All the map relocator is, is a piece that mounts the map sensor so you can run a vacuum line for it. When you order it make sure it has a nipple on it for the vacuum line. Mine came without one so I had to make shift one in there.

Posted: **Sun May 21, 2006 11:05 am**

so i remove all of jacksons stuff except the map sensor spacer?

Hondata

what size inectors to replace fmu?

what size inectors to replace fmu?