Hondata

So Ive been having problems with my car for the past month, and Ive finally narrowed it down to my interface box atleast I think so anyway,

when I run either of my 2 p28s with j1 cut I throw no codes, when I reconnect j1 in either one of them and run a chip I still throw no codes, but as soon as I reconnect my s200 interface box I throw a code (code six ect sensor which I replaced with a new one) and the box blinks, does the interface box have some type of memory on it that has to be reset by a dealer? Thats the only thing that I can think of that would cause this.

Try reburning the Hondata romimage...I would suggest creating a new basemap entirely. If all else fails, take you stuff to your nearest Hondata delaer so they can do some testing and swapping of parts to help find the cause of the problem.

I hope I dont have to get retuned.... I have a Pocket Programmer but I dont have Rom editer does that mean I cant burn a Hondata Chip?

This means you will need to go to a Hondata dealer to have them help you troubleshoot.

I went to my Hondata Dealer today and they burned me another chip with my tuned prgram, PROBLEM SOLVED