Hondata

Hondata,

Would you post the 40 and/or 80 shot kal file for the nitrous dyno you guys did awhile back (w/ stock injectors & CAI on a k20a2). I found the fuel adders in kmanager help. i'm looking for the suggested timing adjustments over the stock tables.

a few questions...

you guys made 283hp @ 7,000rpm on stock injectors. is it possible to hit ~300hp @ ~7,400rpm with cai, rh, and 2.5 comptech exhaust?


Do you have a datalog of the dyno runs? - i would like to know what MAP readings you were getting with the 80 shot ~3psi?

thesilverbullet wrote:is it possible to hit ~300hp @ ~7,400rpm with cai, rh, and 2.5 comptech exhaust?

Probably not. The injectors are too small.

283 hp at 7000 rpm! That was an 80 shot only? Just wondering what is the biggest shot that the stock injectors can handle up to 8000 rpm.

i agree would be nice to have more info. they also dyno'ed a 40 shot but did give any details. would be interesting to see a two stage system around the 8+K range like a 40 shot plus a 20 combo. or maybe a pair of 40 shots and drop one out around 7k and just run a 40 shot from 7-8+k...