Page 1 of 1
Gear comp
Posted: Fri Mar 10, 2006 1:12 pm
by Maverik
Hi!
I've a K-Pro installed on a ECU type PRA (European Civit Type R). Is it possible to change the tables for fuel and ignition compensation and gear ratios? If so, how?
Thanks
Posted: Fri Mar 10, 2006 1:25 pm
by Spunkster
Have you installed the KManager software and taken a look at the options in it?
Gear comp
Posted: Fri Mar 10, 2006 3:08 pm
by Maverik
Yes I have.
In practice, once I've opened my calibration file with KManager, I go to Parameters and then Gear Comp but I cannot modify the tables that are there..
Am I doing something wrong? Do I need to activate some options?
Thanks
Posted: Mon Mar 13, 2006 11:05 am
by Spunkster
Can you post the calibration you are trying to use? Try going to File, New and using one of the base calibrations, can you now see and edit the gear compensation?
Gear Comp
Posted: Mon Mar 13, 2006 2:22 pm
by Maverik
I tried to do what you suggested, but it didn?t work. Attached the calibration file I?m trying to modify.
Posted: Mon Mar 13, 2006 2:36 pm
by Spunkster
Make sure you are using the newest version of sftware by going to help and selecting Check for updates. The current version is 1.2.1.3
Gear Comp
Posted: Mon Mar 13, 2006 3:04 pm
by Maverik
I'm using version 1.2.1.3, but I also tried the beta version 1.2.1.5 without any luck..
Posted: Mon Mar 13, 2006 6:43 pm
by Spunkster
Strange, because the same versions here with your calibration are working perfectly. Can you send a screenshot of exactly what you are referring to.
Posted: Tue Mar 14, 2006 10:27 am
by Maverik
The problem was on my laptop: on my desktop KManager was working OK.
I've formatted my laptop and reinstalled all programs and everything is working fine.
Thanks a lot.