RC-440CC injectors that come with newer Greddy Turbo kit
Posted: Wed Feb 22, 2006 9:20 am
Just want to share this with everyone. I ordered Greddy turbo kit for the RSX Type-S.
I took these injectors out yesterday and measured the resistance. All 4 checked in at about 12.5ohm.
As Hondata have said. Do not use 16ohm base map with these 12ohm injectors. Quite a few people have had bad experience with EP3 kit. (Their problem is the opposit. KPro has 12ohm map but older Greddy kits had 16ohm injectors.
Now I have a question: If I use 550CC 12ohm Greddy base map and change injectors to 440cc in the parameters I would require minor tuning for fuel or would I expect have to do a lot of tuning? (I know either way I'll have to get it tuned.. but just want to confirm that minor fuel tuning might be okay to get me some time to get it tuned?)
Thanks!
I took these injectors out yesterday and measured the resistance. All 4 checked in at about 12.5ohm.
As Hondata have said. Do not use 16ohm base map with these 12ohm injectors. Quite a few people have had bad experience with EP3 kit. (Their problem is the opposit. KPro has 12ohm map but older Greddy kits had 16ohm injectors.
Now I have a question: If I use 550CC 12ohm Greddy base map and change injectors to 440cc in the parameters I would require minor tuning for fuel or would I expect have to do a lot of tuning? (I know either way I'll have to get it tuned.. but just want to confirm that minor fuel tuning might be okay to get me some time to get it tuned?)
Thanks!