How to Convert Stage 2 programming to S100 spec?

guilotine · Post by **guilotine** » Thu Dec 08, 2005 4:16 pm

Ok heres the situtation. I currently have my Integra fully tuned with a P28 with a Hondata Stage 2 but recently acquired a S100 already witha P28. I wish to get rid of the old Stage sytem since Hondata no longer supports it and I have a buyer. I know I can't just swap the chip from my Stage 2 and install it in my S100 because the programming is different
heres the question....

I have access to a Eprom burner...
what changes do i need to do to make this program compatible with my new S100?

Do I need to have both the stage sytem and s100 software to accomplish this?
thanks

RMS · Post by **RMS** » Thu Dec 08, 2005 10:47 pm

you just need to read your chip, email the bin file to someone with romEditor software, and that person can convert your program and send the rom image back to you. unfortunately, you may have to do some slight tuning as the conversion is not perfect though close.

i'll do the conversion for you no charge:
ravermotorsports@earthlink.net