Hondata

Hi, I will tune in a couple of days a race car with Toda vtc killer pulleys and specB cams. My question is about the settings on the K-Manager. Correct me if I am wrong:

1. VTC disabled
2. Cam angle set at 0 for low and high cam
3. Tune the 0 degree ignition and fuel maps

That's all I think.

when tuning, turn off "tables follow cam angle" or else kmanager will wig out. With vtc turned off, the cam angle is -20deg, and k-pro obviously does not have a -20deg cam angle map.

So are the steps I mentioned correct with the addition of 'tables follow cam angle' disable?