Attn: hondata--need s200 repaired/shipping info
Posted: Mon Aug 15, 2005 7:23 pm
Hondata,
I live in edmonton, alberta, canada. I have an s200 serial no:0656. I pulled the car in my garage after work, let it idle before shutting it off, and heard a click (same as when you turn the key to accessory). The cars idle stuttered, then a CEL came up. I turned the car off, back on, and saw the led on my s200 flashing. I swapped it out with a friends s200 and it works fine.
So the diagnosis is a problem with my s200. It is not mounted to a hard surface where it would get alot of vibration, nor was I changing anything when the problem occurred. The problem was instant and now I need to use my friends s200 to run my car.
I need to send it in but would like more info including whether or not it will be repaired for no fee. I had sporadic tuning issues where I would hit what felt like ignition cut at high rpm's. I replaced my coil, wires, etc and it did not go away. It was still sporadic and now I am concerned that this problem was also in the s200 as it went away with the replacement s200 unit.
Please let me know my course of action and a full shipping address, etc and I will ship it priority asap. What would be the turnaround time in this case?
Cheers,
Duane A Leedell
dleedell@telus.net
I live in edmonton, alberta, canada. I have an s200 serial no:0656. I pulled the car in my garage after work, let it idle before shutting it off, and heard a click (same as when you turn the key to accessory). The cars idle stuttered, then a CEL came up. I turned the car off, back on, and saw the led on my s200 flashing. I swapped it out with a friends s200 and it works fine.
So the diagnosis is a problem with my s200. It is not mounted to a hard surface where it would get alot of vibration, nor was I changing anything when the problem occurred. The problem was instant and now I need to use my friends s200 to run my car.
I need to send it in but would like more info including whether or not it will be repaired for no fee. I had sporadic tuning issues where I would hit what felt like ignition cut at high rpm's. I replaced my coil, wires, etc and it did not go away. It was still sporadic and now I am concerned that this problem was also in the s200 as it went away with the replacement s200 unit.
Please let me know my course of action and a full shipping address, etc and I will ship it priority asap. What would be the turnaround time in this case?
Cheers,
Duane A Leedell
dleedell@telus.net