Page 1 of 1

another noob (kpro for 05 ep3)

Posted: Mon Jun 13, 2005 2:27 pm
by bee619
I reall wanna get a Kpro for my 05 ep3 and run this for a while till I have enough for k20a2 swap.

my question is...

1)"To use the K-Pro on a 2005 RSX, an adapter harness is required, a 02-04 specially modified ecu must be modified for used and the primary oxygen sensor from an 03-04 must be used. " is this the same case for the 05 Civic Si?


2)When I decide to drop a k20a2 into my 05 Honda Civic Si, could I use my existing kpro but with the k20a2 map or would I have to send my kro back in or buy a new kpro for k20a2?

much thanks...

Posted: Mon Jun 13, 2005 3:31 pm
by Spunkster
The adapter aplies only to the RSX.

YOu can use your existing ECU, but if you have a 6 speed tranmision, you will not have reverse lockout with the SI ecu.