Hondata

Hi all. I have a 2002 Acura RSX base, and me and a friend of mine were out doing datalogs and a little bit more fine tuning (got fuel done). He went to do some ignition tuning. I believe he only advanced 1.5 degrees, but I don't remember what RPM range. Now the issue I have is that no matter what calabration is loaded, at 28% throttle from 2800 - 5000 rpm, the ignition is retarded 30 degrees. I've tried re-loading the original calaration, the RSX Base tuned 91 oct calabration and with all of them, the car keeps doing the same thing. What's going on?

1. Close and restart KManager.
2. Clear security in case is was set accidentially.
3. Load a built-in calibration and upload.
4. Datalog, and if the ignition is still retard then post the datalog on this forum.

Hondata wrote:1. Close and restart KManager.
2. Clear security in case is was set accidentially.
3. Load a built-in calibration and upload.
4. Datalog, and if the ignition is still retard then post the datalog on this forum.

Just drove it right now. I loaded my calibration that was on my laptop and now the car runs fine. Odd. I guess mikey's laptop is getting funky.