Page 1 of 1
nitrous control option, used for exhaust cutout????
Posted: Mon Mar 14, 2005 10:44 am
by turbocivicex
I was wondering if you can use the nitrous control option to control an electric exhaust cutout? I have a 96 civic hatch with a turbo GSR swap. I am trying to keep the stock exhaust (sleeper look) and put the electronic cutout on the turbo down pipe. I would like it to open, automatically at WOT, and still be tuned correctly. Can the nitrous control do this?
Posted: Mon Mar 14, 2005 11:09 am
by Spunkster
Yes you should be able to do this if it is wired in the same manor as a nitrous solenoid. You will have to upgrade to an s200 in order to be able to do this.
Posted: Mon Mar 14, 2005 1:18 pm
by turbocivicex
sorry old signature... I need to change it!
Posted: Wed Mar 16, 2005 6:21 am
by Clutch
Posted: Fri Mar 18, 2005 12:26 am
by RMS
no need for an s200... s100 has n20 control, too.
the atp system looks nice (best off-the-shelf setup i've seen), but i think an actuator pot controlled by vacuum would work faster to help quicker spooling. obviously would required a source of vacuum like the iabs on a gsr/h22. ever noticed how the by-pass on a jrsc works? same idea. but the atp would be an easy way to go as you can simply buy the parts.