Hondata

Posted: **Mon Feb 28, 2005 10:57 am**

On my s200 cable, the wires pulled out of the end that plugs into the s200 box. Could someone tell me which wire color goes to which pin so i can fix it.

Posted: **Tue Mar 01, 2005 4:25 pm**

does no one have a cable handy to tell me which color goes to which pin?

Posted: **Tue Mar 01, 2005 4:51 pm**

You should purchase a new cable from one of the Hondata dealers. If yours has come apart it is damaged and will not stay. Also you run the risk or wiring it incrrectly and damaging the interface box and ecu. THey are $15 from any dealer.

Posted: **Tue Mar 01, 2005 9:33 pm**

I understand that it could be wired wrong, thats why i'm asking what color is what pin. As for ordering another one, I need my car asap, and I can solder the wires back onto the pins in the connector. If someone could please let me know what color is what pin it would be appreciated.

Posted: **Thu Mar 03, 2005 11:36 am**

If someone could atleast post a picture of there cable I would appresiate it.

Posted: **Thu Mar 03, 2005 6:45 pm**

I have been looking at pictures of the cable and this is what i see-
top left - red
bottom left - orange
top right - black
bottom right - brown

This is with the locking clip up and looking from the backside of the plug. Can anyone confirm this so I can repair it and get my car running. Thanks.

Posted: **Thu Mar 03, 2005 8:32 pm**

Those colors are correct.

Posted: **Thu Mar 03, 2005 9:41 pm**

Thank You