Page 1 of 1
Converting US PRB RSX-S maps to UK PRA CTR maps ?
Posted: Fri Feb 11, 2005 9:02 pm
by Hadi
Is there any way to convert US PRB maps to be use on UK PRA ECU ?
thanks
Re: Converting US PRB RSX-S maps to UK PRA CTR maps ?
Posted: Fri Feb 11, 2005 11:21 pm
by foobari
Hadi wrote:Is there any way to convert US PRB maps to be use on UK PRA ECU ?
Copy-pasting the tables from RSX maps into Type-R base map works.
Re: Converting US PRB RSX-S maps to UK PRA CTR maps ?
Posted: Sat Feb 12, 2005 12:51 pm
by Hondata
foobari wrote:Copy-pasting the tables from RSX maps into Type-R base map works.
If you cut and paste the indexing will be wrong. Why do you want to use the RSX tables?
Re: Converting US PRB RSX-S maps to UK PRA CTR maps ?
Posted: Sun Feb 13, 2005 3:00 am
by Hadi
Hondata wrote:foobari wrote:Copy-pasting the tables from RSX maps into Type-R base map works.
If you cut and paste the indexing will be wrong. Why do you want to use the RSX tables?
coz am thinking about boosted my 2003 CTR with Greddy turbo kit, Cybernation or revhard (stage 1), and no one got the calibrations for those turbos, so am thinkin of using the RSX-S one.
Posted: Wed Feb 16, 2005 10:08 am
by Hadi
any ideas ??
Posted: Wed Feb 16, 2005 12:33 pm
by Hondata
We do not recommend cutting and pasting tables between different types of ECU, nor hacking the calibration file to load as a different type. The different ECUs use different compensation tables so the same values for each ECU will not produce the same results.
Ultimately you need to tune the ECU to the engine.
Posted: Sat Feb 19, 2005 9:35 am
by Hadi
what about changing the ECU numb from 3 to 2 , and change the low speed rpm from 750 to 800/8100 to 8000 ? and the high speed rpm from 5750 to 5800 ?
thanks