Page 1 of 1
2014 Accord V6 J pipe only
Posted: Wed Jan 28, 2026 2:59 pm
by fzr100098
Considering the Flashpro Race j pipe and high flow cat flash, but if I only have a j pipe and high flow air filter, should I stick with a stock flash? Worried about running lean with stock flash.
Re: 2014 Accord V6 J pipe only
Posted: Wed Jan 28, 2026 3:19 pm
by Spunkster
You may need to custom tune this on the dyno.
Re: 2014 Accord V6 J pipe only
Posted: Wed Jan 28, 2026 3:28 pm
by fzr100098
Ok but what "canned" flash would you recommend in the near term?
Re: 2014 Accord V6 J pipe only
Posted: Wed Jan 28, 2026 4:13 pm
by Spunkster
You would have to try different ones and datalog to see what is safest with the a/f and also to make sure there is no knock.
Re: 2014 Accord V6 J pipe only
Posted: Thu Jan 29, 2026 11:33 am
by fzr100098
Car runs fantastic on the ATLP V2 j pipe and 91 octane flash - I'm running Shell 93 just to be safe