Hondata

i have euro ctr and also pra ecu . now i'm going to order K-pro with New PRB ecu + RSX Type S primary oem sensor to use it. But i have confused that is the ecu pins has some differences between pra and prb ecus ?
i hear that the fuel pumps trigger pins is different ? any comments on running this setup on my car ?

This has been done now a number of times, but no-one seems to want to share the information about the pin modifications. In the UK, retailers like CPL Racing and System-R have done this and still do these conversions. I've heard that Hondata and these retailers went through the pin diagrams and know exactly what has to be done. Even someone in the UK Civic-R forum had the instructions to do it as well...

I would need this information as well since I've bought a PRB K-Pro for my euro-spec CTR as well.

Hondata: Could you please provide us the pin modifications needed to use a PRB K-Pro ECU (and a RSX-S front O2 sensor) on a UK CTR?

Thanks!

As you say, the people who have done this do not want to share the information.

We know that this is possible but do not have the wiring diagrams. We do not have an vehicle with Euro wiring in the US, and cannot test the modifications here. If we do find out, we will post the information on our website.

Ok, thanks for your reply. I'll try to contact the retailers who have done it if they would share the info...

Hi Versus and Hondata. Did you ever find out what changes need to be made for the US K-pro to function correctly on a Euro CTR?