Page 1 of 1
Resistor and capacitor install questions.
Posted: Sun Dec 08, 2002 4:41 am
by SIMPLE4012
Hey guys...i just got my s200 with basically every option and am installing it into my p28. Have a question though. The capacitors and resistors. Which ones are needed or not needed for a p28? I called hondata and spoke to a tech and he said that some arent needed. Just curious. Also, if i lose a capacitor or resistor can i simply go to a local electronics store that carries them and buy the same uF or do i have to buy them from hondata direct? because i went to radio shack and the same uF item looked different then what i had so i didnt wanna buy it and install the wrong product.....thanks guys
P.S....the issues i have are with R54, C51 and C52 for reference.
Tom
Posted: Sun Dec 08, 2002 7:42 am
by Dariusz
I have a P72 and 3 weeks ago I install the S200. I talk with Hondata and he say that the C51 and C52 are not used, he say that this are for old models.
c51 & c52
Posted: Mon Dec 09, 2002 5:23 pm
by Hondata
It is not strictly necessary to install c51 & c52. We've only see one case where an ECU would not work without these, and the issue only occurred while using an emulator.
Posted: Wed Mar 19, 2003 8:22 am
by BoostedH23a1
my 1 and 3 on my p72 is not getting power should i try the compasitors in mine? it worked for a few hours.
Posted: Wed Mar 19, 2003 6:23 pm
by QUICKSILVER RACING
Check wires for the interface box. sometimes its loose.
Re: c51 & c52
Posted: Fri Mar 21, 2003 9:15 am
by turbosi92
Hondata wrote:It is not strictly necessary to install c51 & c52. We've only see one case where an ECU would not work without these, and the issue only occurred while using an emulator.
So, if my ECU already has these installed, should I remove them or just leave them?