Page 1 of 1
K24 Turbo 8th Gen not running correctly
Posted: Mon Jun 16, 2025 8:05 am
by Turbofg2
Hey I have a k24 turbo 8th gen that’s not running great.
It idles pretty poorly and cam angle is stuck at 0 even when commanding 15. I was wondering if someone could give me some insight with my data logs.
Re: K24 Turbo 8th Gen not running correctly
Posted: Tue Jun 17, 2025 10:04 am
by CalibratEd
Post the calibration file as well and I can take a look at it.
-Ed
Re: K24 Turbo 8th Gen not running correctly
Posted: Tue Jun 17, 2025 11:39 am
by Turbofg2
Here’s the cal, thanks for taking a look
Re: K24 Turbo 8th Gen not running correctly
Posted: Wed Jun 18, 2025 7:10 pm
by samk20z1@hotmail.com
tienes a taba vtc en 0
Re: K24 Turbo 8th Gen not running correctly
Posted: Thu Jun 26, 2025 8:36 pm
by CalibratEd
Like
samk20z1@hotmail.com stated. The non Vtec VTC table is set to 0. The only areas that has been populated is the VTEC VTC. We can not see that data as this only an idle log and your Vtec is set at 5,700rpm.
- Ed