Hondata

Hi,

I have a problem to control boost with my Twin 44m.
Running Hondata 4port solenoid
I plugged ad this diagram below with a T
https://www.hondata.com/images/hondata_ ... ctions.pdf

and can't control my boost, that makes no sense at all I barely get 2 or 3%, Either 1 b or 3b

Could you confirm that Hondata 4port Solenoid need to be set as a normally open in S300 boost control ?
Is the plugging correct ?

Thank you for your help

It needs to be set as normally closed.

Thank you,
And plugged as below for Wastegates ?

https://www.hondata.com/images/hondata_ ... ctions.pdf

Does it work also if I set normally open and invert connections A&B on wastegate ?

It should come with a diagram to show how it needs to be plumbed in the package with the solenoid.

Hi,
It works with normally closed and std diagram
Thks
40% I'm around 23-25 PSI