Hondata

FlashProManager 4.4.4 (24 Mar 2025)

• Firmware updated to version 257
• [FK8] added extra datalogging sensors
• [CanFlex] Fixed MIL with older FlashPro under some conditions
• [2016+ Turbo Civic] Added support for 2020 model 5AW-TG1 Turkey
• [2018+ Accord 1.5T] Fixed no start issue

Download here

Hi,

can you specify the extra datalogging sensors for the FK8?

And do they work with just updating the flashpro or is reflashing the map to the ecu necessary?


Thanks,
Thomas

The ECU has to be reflashed.

'Trq Req' = torque request
'Act Trq' = actual torque

See the help file for more information on those
https://hondata.com/help/flashpro/torque_parameters.htm
https://hondata.com/help/flashpro/bosch ... _model.htm

Additional channels for helping diagnose torque limits in high hp vehicles (over 600 hp)

'trq_max', 'arc_max', 'airc_red'

Hondata wrote: Tue Mar 25, 2025 10:02 am The ECU has to be reflashed.

'Trq Req' = torque request
'Act Trq' = actual torque

See the help file for more information on those
https://hondata.com/help/flashpro/torque_parameters.htm
https://hondata.com/help/flashpro/bosch ... _model.htm

Additional channels for helping diagnose torque limits in high hp vehicles (over 600 hp)

'trq_max', 'arc_max', 'airc_red'

THANK YOU VERY MUCH!!!

MUCHAS GRACIAS!!!!

This will be very handy for us!

Not being picky, i appreciate all the hard work....

Just pointing it out in case it flew under the radar... The "tracer" marker on KFMIRL table for FK8 doesnt show for the column/row

It is no problem; simple to fix.

Hello Hondata, just a question regarding a new datalog value (torque request), on my calibration I have on the torque request table a value of 500nm (~83%) but on the datalog torque request value shows 87% (522nm).
I'm not uderstanding why this diference, doesn't this value should be same on my request table of my calibration?

The aircharge max is correct with my calibration table.

Thanks

which car? FK8? FL5/DE5? Probably should post this question in the Type R 2015+ forum and provide more specifics

jeffx wrote: Sun Mar 30, 2025 9:53 am which car? FK8? FL5/DE5? Probably should post this question in the Type R 2015+ forum and provide more specifics

FK8

I've been eagerly awaiting the release of this version for a long time, but unfortunately, it still does not include support for my car model. Ever since I sent the original factory program to Hondata in December last year, I've been on a long wait. I'm very eager to know whether the 37820-6KA-H030 will be supported in the next version. Thank you very much for all your work.

Please send the file again.

Is this a hatchback?

I have attached the stock program and description file that I read using PCM Flash. This is a Chinese domestic sedan, and I am very sure that it belongs to the same generation as the 37820-64C-H01 (hatchback) that Hondata already supports. If you need further information, I can send it to you via email. Back in February, Matt told me that support would be added in about a month or more. I hope it will be updated in the near future. Thank you very much!

So, can we look forward to the next update? Thank you!

Our software engineer is working on this.