Hondata

Hello ,
there is a reason why my Psp light is always on in the sensor window when nothing is connected to B8 ??
I need B8 work

(B5 ACS is wired and works very well, grounded "on" ungrounded "off")

thank's

What do you have connected to this and how is it connected?

hi,
nothing is connected, the wire is cut directly at the exit of the harness ECU
yet the indicator in S-Manager tells me "on" as if it were grounded

If B8 is not connected, but the PSP light is still on, check if B8 is floating or possibly shorted to ground.