Page 1 of 1
FlashProManager 4.3.9
Posted: Mon Dec 23, 2024 4:45 pm
by Hondata
FlashProManager 4.3.9 (23 Dev 2024)
- [Spoon Sports] Added Stage 3.5 calibration for N-One 2023 CVT JG3 RS Japan
Download
here
Re: FlashProManager 4.3.9
Posted: Sun Jan 05, 2025 7:02 pm
by William.Y
UpLoad fail , FL5-110 , ECU No. J03 , Flash Pro Serial No. 371648.
''send feedback'' sent. Please check what happen, can not upload with J03 and J02 ECU, many thanks.
Re: FlashProManager 4.3.9
Posted: Mon Jan 06, 2025 9:28 am
by Hondata
It works here. Does return to stock work? In that case it would be the jailbreak.
Re: FlashProManager 4.3.9
Posted: Tue Jan 07, 2025 7:19 pm
by William.Y
thanks for reply, will try again later
Re: FlashProManager 4.3.9
Posted: Wed Jan 15, 2025 6:13 pm
by William.Y
Hondata wrote: Mon Jan 06, 2025 9:28 am
It works here. Does return to stock work? In that case it would be the jailbreak.
Hi, is the jailbreak procedure same with the FL5-110 JDM version ? And dose it need to change the CAN Gateway ?
Re: FlashProManager 4.3.9
Posted: Thu Jan 16, 2025 9:08 am
by Hondata
Jailbreak is the same. If the gateway has a part number ending in JA1 then it needs to be changed.
Re: FlashProManager 4.3.9
Posted: Fri Feb 28, 2025 8:12 pm
by William.Y
Hi , If change the can gateway, it will gives VSA errors. Can the HONDATA CAN Bridge use on the FL5-110 ? Or any other solutions ?
Re: FlashProManager 4.3.9
Posted: Sat Mar 01, 2025 2:21 pm
by Hondata
Yes, it works on the FL5-110. Probably still 3-4 weeks away from that release.
Re: FlashProManager 4.3.9
Posted: Fri Apr 11, 2025 4:35 am
by William.Y
Hi , has it been released yet?
And I have problem with flashpro manager during register after update to 4.4.5.0, it shows [check you have a internet access] , and my network is 100% no problem.
Re: FlashProManager 4.3.9
Posted: Fri Apr 11, 2025 7:35 am
by Hondata
Not yet. Soon. Parts delayed by the new tariffs.