Hondata

Hi guys I've bought an FN2R (europe) ecu from my friend and a hondata flashpro for that model. I installed the program and plugged in the flashpro to the port, the system loaded but I went through the steps to use the flashpro and I was trying to lock the ecu but it said cannot lock ecu because ecu has unrecognised calibration. Everything on the bottom of the screen is ticked and it shows unlocked. Somebody help.

I attached a pic of what the setup looks like rn

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.