New to tuning

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
(thgen
Posts: 1
Joined: Tue Jul 23, 2024 2:44 pm

New to tuning

Post by (thgen »

I've got a 2012 si coupe that im trying to tune. it has a k&n short ram intake, cat back from comptech, and a stage 2 Kevlar clutch kit with oe plus fly wheel from action clutch. ive got the hondata reflash tune loaded and im trying to figure out how to read the graphs properly so i can tell if its running to rich/lean. i had the sri/.../catback tune loaded but it felt like there wasn't any power between 4 to 5k rpms so i went back to the hondata reflash. i wanna learn to tune this myself but i dont know where to start. any help is appreciated.
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: New to tuning

Post by CalibratEd »

(thgen wrote: Thu Jul 25, 2024 10:03 pm I've got a 2012 si coupe that im trying to tune. it has a k&n short ram intake, cat back from comptech, and a stage 2 Kevlar clutch kit with oe plus fly wheel from action clutch. ive got the hondata reflash tune loaded and im trying to figure out how to read the graphs properly so i can tell if its running to rich/lean. i had the sri/.../catback tune loaded but it felt like there wasn't any power between 4 to 5k rpms so i went back to the hondata reflash. i wanna learn to tune this myself but i dont know where to start. any help is appreciated.
If you're trying to learn to Tune I suggest you lookup evans tuning on youtube. He has a few videos that may help.

You're also welcome to post the calibration file you are running along with a datalog. I can take a look at it and let you know how the car is running.

- Ed
Instagram: calibrated.tuning
Post Reply