Page 1 of 2
SManager 2.8.7
Posted: Mon Jul 01, 2024 8:37 am
by Hondata
SManager V2.8.7 (29 Jun 2024)
•[S300 V3] Firmware version 22
•[S300 V3] Improved onboard datalogging
•[S300 V3] Improved onboard calibration storage
This release fixes any problems when on board datalogging and laptop datalogging and then uploading a calibration at the same time.
Download
here
Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.
Re: SManager 2.8.7 datalog issue
Posted: Sun Jul 14, 2024 1:55 pm
by yball26
]Hello, I have problems with the data log of my track pass, they had always worked quite well, sometimes I had an error in the data but now everything is wrong, the miles per hour says 400mph and crazy things, if you have a way to fix the data or download again I tried two different laptops and the same error still occurs, it's Windows 10 in case you ask me. Thank you, I look forward to your prompt response.
Re: SManager 2.8.7
Posted: Mon Jul 15, 2024 9:22 am
by Spunkster
What is the serial number that is on the s300 board inside the ECU?
Re: SManager 2.8.7
Posted: Mon Jul 15, 2024 3:24 pm
by yball26
59843
Re: SManager 2.8.7
Posted: Mon Jul 15, 2024 4:23 pm
by Spunkster
Are you datalogging with the laptop, or are you using on-board datalogging?
Re: SManager 2.8.7
Posted: Mon Jul 15, 2024 4:27 pm
by yball26
on board
Re: SManager 2.8.7
Posted: Mon Jul 15, 2024 4:28 pm
by yball26
I never had any problems with the laptop.
Re: SManager 2.8.7
Posted: Mon Jul 15, 2024 4:47 pm
by Spunkster
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Re: SManager 2.8.7
Posted: Mon Dec 16, 2024 11:35 pm
by spAdam
Any chance that PLX protocol was dropped from the digital inputs in the latest firmware?
I haven’t used my S300 in almost a year and I updated everything before I plugged up. I can’t get the digital inputs from my sm-afr. I’ve confirmed wiring is solid and continuity is good, the PLX gauge is working off of the Y-connector so I know the sm-afr is broadcasting. Worked flawlessly in the past.
Any ideas?
Re: SManager 2.8.7
Posted: Tue Dec 17, 2024 8:29 am
by Hondata
No changes have been made in that area.
Re: SManager 2.8.7
Posted: Tue Dec 17, 2024 1:46 pm
by spAdam
Copy, thanks. I’ll keep digging.
Re: SManager 2.8.7
Posted: Tue Dec 31, 2024 6:19 pm
by wanganracing93
Hondata wrote: Mon Jul 01, 2024 8:37 am
SManager V2.8.7 (29 Jun 2024)
•[S300 V3] Firmware version 22
•[S300 V3] Improved onboard datalogging
•[S300 V3] Improved onboard calibration storage
This release fixes any problems when on board datalogging and laptop datalogging and then uploading a calibration at the same time.
Download
here
Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.
Hi team, I’m currently having issues with this, im getting “out of date” even though I downloaded the most recent software out the website. Unable to connect to the laptop. Attached is image of error.
Please help I just bought this car and it came with an s300 and I’m trying to see what it’s running on. Thanks in advanced.
Re: SManager 2.8.7
Posted: Thu Jan 02, 2025 10:42 am
by Spunkster
What computer, processor and version of Windows are you using?
Re: SManager 2.8.7
Posted: Sat Jan 04, 2025 1:20 pm
by wanganracing93
attached is all the info. thanks for the response
Re: SManager 2.8.7
Posted: Tue Jan 07, 2025 2:34 pm
by Spunkster
Go to the help menu and click on about and take a screenshot and post it here.