Hondata

Welcome to the forum,

Post the calibration and a datalog. I can take a look at it.

- Ed

Here are the calibrations. Sorry for the delay couldn't get signed back in

Thanks ed

That is strange. It looks like I started the thread but Rubbershugzilla was the original poster. I am posting the files you sent me for reference.

"The car has the following parts added.

Walbro 255 fuel pump
Rc 750 injectors
Pracworks intake manifold
KTuned 70 throttle body
4bar map sensor
Borgwarner turbo
Twin tial wastegates

Internally the block is stock.
When we loaded the file the car was able to run and idle but any throttle makes car choak and stall."

- Ed

I looked over the files. Make sure you have selected the proper MAP sensor and added the proper injector deadtimes. Once you do that create another datalog.

- Ed