Page 1 of 1
E18 output for shift light
Posted: Thu Apr 18, 2024 8:19 pm
by corlon
hello, using E18 shift light output to trigger (-) a relay for aftermarket shift light. is there a low limit to the rpm it can be set at? i have 1st gear rpm set to 2000rpm to see if i can get the light to turn on. it the output does not read ground at 2000rpm or above. metering the output of E18 gets me around 6.0 mega ohms to ground.
Re: E18 output for shift light
Posted: Fri Apr 19, 2024 9:04 am
by Spunkster
How exactly do you have this wired?
Re: E18 output for shift light
Posted: Fri Apr 19, 2024 2:51 pm
by corlon
haven't connected E18 output to the circuit. just testing the output with a meter.
Re: E18 output for shift light
Posted: Tue Apr 23, 2024 7:27 pm
by corlon
Is there a low limit to the shift light rpm?
Re: E18 output for shift light
Posted: Wed Apr 24, 2024 9:05 am
by Spunkster
No there isn't.
Re: E18 output for shift light
Posted: Thu Apr 25, 2024 9:06 am
by corlon
Thank you.