Hondata

Posted: **Wed Apr 03, 2024 1:57 pm**

I'm not sure if I've made a misclick somewhere but today after playing around in my timing tables for a while I noticed I could not open certain options from the calibration window.

Clicking on Calibration, VTEC, Rev Limits, Idle and Misc in the calibration window no longer have any affect.

Since then I did the latest update and it had no effect on the problem.

Posted: **Wed Apr 03, 2024 2:18 pm**

7plymaple wrote: Wed Apr 03, 2024 1:57 pm I'm not sure if I've made a misclick somewhere but today after playing around in my timing tables for a while I noticed I could not open certain options from the calibration window.

Clicking on Calibration, VTEC, Rev Limits, Idle and Misc in the calibration window no longer have any affect.

Since then I did the latest update and it had no effect on the problem.

My apologies. no assistance needed. I figured it out and it was my own stupidity. I resized the calibration box and blocked out the part of it where those options would show up.

Hondata

Can't Open All Options in Calibration

Can't Open All Options in Calibration

Re: Can't Open All Options in Calibration