Hondata

I purchased a FlashPro mini for my 2023 civic touring 1.5 CVT. I followed a youtube video online and everything seemed to go perfect uploading the 93 octane tune to the flashpro. Once I plugged the flashpro into the car and hit program, all the lights came on the dash for sensors, transmission, engine, breaking ect. The flashpro blinked red and i left it in for a bit hoping it was just configuring. When i plugged it back into the computer just said that the tune failed to upload. I've tried the 5 different calibrations suggested for my vehicle and it all seems to blink red and fail. The car now wont start and just continues to display all the error codes. If anyone has any suggestions let me know or let me know what further information I need to provide to get help. Thanks.

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

I just plugged in and "sent feedback" twice using "Tuning Issue" and another option. I also have two screenshots if you can give me an email address. I will try to upload those as separate replies.

I also just emailed support@hondata.com with the two pictures. Please advise.

Hello, I have "return to stock", and my car is running again. I think I interrupted the upload previously. However, now I have two lights on: road mitigation and adaptive cruise control. And, I cannot clear them. Please advise.

Go to the online menu in the software and then click on OBDII diagnostics and try clearing the errors from there. If any remain, you will just need to drive it until they go away on their own.

You should try uploading a non-stock calibration again.