Hondata

4.2.0 (4 Jan 2024)

• [2023+ Integra Type S] Added exhaust flap position
• [2023+ Civic Type R FL5] Added exhaust flap position
• [2023+ Civic Type R FL5] Added pops and bangs
• [FK2 FK8 FL5 DE5] Added wastegate position and flow tables

4.1.9 (12 Dec 2023)

• Firmware updated to version 235
• [2022+ Civic Si] Added support for 2024 model 64B-AB1 US

Download here

Please only reply to this thread with issues & questions specific to the changes in this release. For all other problems start a new thread under the appropriate vehicle category.

Hello
I just updated the Manager from V4.1.2 to V4.2.0
When it tries to upload Firmware : the software immediately goes into "Not responding..."
FlashPro is not connected to car
Internet connection is OK
FP S/N : FP-SI-INT-21286
I tried restarting the computer several times
It used to work well before
I have 4 datalogs I have not downloaded yet; I can do nothing else than accept the firmware upload, which crashes everytime

Thank you for your help
Pouya

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

I don't use a laptop that I could take in the car
Anyway it wouldn't be helpful I guess because I don't have access to anything in the software when I plug the Flashpro to the computer USB (including the Help menu) as it shows right away the message box saying the firmware will be upgraded
whether I click OK or if I just close that message box : the Power led starts blinking and the software freezes right away; I cannot click on the Help menu

I uninstalled V4.2.0 and installed V4.1.2 : it worked and I could access the datalogs, but I think 2 files were corrupted
I could not download them, neither to the software, or to the computer; clicking Donwload or double-clicking the file didn't work
So I saved the files I could save and deleted all datalogs
I tried again to install V4.2.0 and exactly the same problem happens when I connect the FlashPro : the software freezes
I cannot hit Send feedback, or do anything else actually
Thanks

Using the old software, send the feedback as requested.

Spunkster wrote: Thu Jan 04, 2024 5:23 pm Using the old software, send the feedback as requested.

Alright, I just did that

Will there ever be a pops and bangs tune for the fk8 platform like the fl5?

Hello I just purchased a Hondata flash pro but it says it’s for a civic si and I have a 2003 Honda accord cl7 euro r jdm by any chance will this work ?? The serial number for the pro is FP-SI-US-14379. Any input would be nice thank you in advance.

No, it will not work on that vehicle. What is the ECU part number?

Kadlecikj wrote: Wed Jan 24, 2024 7:58 pm Will there ever be a pops and bangs tune for the fk8 platform like the fl5?

Can this feature be added for the fk8?

Thanks