Hondata

This has to be a software bug, as the video demonstrates I change nothing and lambda overlay goes from blank to populated. Attached is my .kal and log, as I'm sure it will be requested. Using stock wideband

https://youtu.be/qbhNQDClKtQ?si=MZZ0i_D-Tl2M6Yfy

What is the serial number on the K-Pro board inside the ECU?

From Help, About, what is the version of software you are using?

The datalog appears to be corrupt that you have posted.

I will check serial shortly. The Software version is 4.5.7 Any log on that version displays the same. If I open a previous log of an older version, it displays correctly, which leads me to believe it was a change in the last update.

Correction - no logs are displaying correctly upon first load. I've got hundreds to choose from in the past 3 years so no way they're all corrupt

Serial no 56338

It is because map is datalogging as 0. Will be fixed in a release tomorrow.

very cool, thank you for the reply. as another on here has noted, when you export a datalog, the values are 0 on the rpm column. Is this all part of that same problem? Will I be able to view old datalogs no problem?

It should all be working in the next release.

Awesome. Thanks guys!

Still having the lambda overlay issue. It shows as long as i do the procedure on the video but the "data" bubble on the sensors list is not filled during datalogging.

viewtopic.php?p=134937#p134937

Did you create a new datalog? If so, post it here.

Here is the kal and datalog

Works ok.

Does the "data" indicator work for you? It's just an annoyance that it doesn't for me as i have a custom indicator on my display that is much bigger than the rec icon (next to lightning bolt). It verifies that im data logging with a quick glance.