Page 1 of 1

please check my cal

Posted: Mon Dec 11, 2023 8:09 pm
by dercanbonlyone
04rsxs pray 3cams k2024 na frank.

Re: please check my cal

Posted: Tue Dec 12, 2023 8:11 am
by dercanbonlyone
Two minutes and twenty seconds in it begins to miss and slightly bog. Then really bad at 2 minutes fifty seconds.
Also I have 440 injectors and bored cylinders to 88mm. Nothing new to the tune since dynatune at speed factory but since then is now falling apart. Perhaps corrupt tune

Re: please check my cal

Posted: Tue Dec 12, 2023 10:00 am
by Spunkster
You should take it back to the tuner and have them take a look at it.

Re: please check my cal

Posted: Tue Dec 12, 2023 10:50 am
by dercanbonlyone
Unfortunately the person that originally tuned mine over at speed factory no longer works there because it was quite a while ago but they said they had my file on tune and it's the exact same one that I currently have now so it can't be that. But thanks for the reply and advice.

Re: please check my cal

Posted: Tue Dec 12, 2023 12:03 pm
by Spunkster
They may still need to take a look at things as there could be a mechanical issue.

Re: please check my cal

Posted: Tue Dec 12, 2023 12:32 pm
by dercanbonlyone
Ok. I'll keep trying to appeal to their better nature. I understand you guys aren't miracle workers with every answer but I still appreciate and value your input. I know nothing.

Re: please check my cal

Posted: Wed Dec 13, 2023 9:20 am
by MondeCruel
I watched the log, your map sensor is working ok ?

Re: please check my cal

Posted: Wed Dec 13, 2023 12:09 pm
by CalibratEd
Double check your Intake Air Temperature sensor. Throughout the whole log it was reading 43 degrees. This value should change as the car warms up.
If possible post a part throttle log.

- Ed

Re: please check my cal

Posted: Wed Dec 13, 2023 4:48 pm
by dercanbonlyone
Yes my map was fine I tried three new ones honestly but I bought three of them they all read good. Also Aaron take temperature sensor was new but I could try another one just cuz couldn't hurt wouldn't be the first time I bought something new that was broken

Re: please check my cal

Posted: Wed Dec 13, 2023 4:50 pm
by dercanbonlyone
Also it's piss cold out here right now That's in the middle of the night with my hood up

Re: please check my cal

Posted: Wed Dec 13, 2023 5:06 pm
by CalibratEd
dercanbonlyone wrote: Wed Dec 13, 2023 4:50 pm Also it's piss cold out here right now That's in the middle of the night with my hood up
Oh ok. Post a part throttle log.

- Ed