Page 1 of 1

Knock control under low speed and low load

Posted: Tue Dec 05, 2023 5:44 am
by 2907958682@qq.com
Hello everyone on the forum, I would like to inquire about a question and a solution. My car is a Civic 1.5T, and when I used the KTUNER before, I couldn't solve the problem of high knock control. Later, I switched to hondata and found that it still couldn't solve the problem. I can be sure that there is no problem with the fuel. I am using gasoline with a 98 octane rating, and at a speed of around 1500 rpm and 80-90 km/h, the knock control is always very high, reaching 90%, I don't know how to solve this problem now. I see that there are also people on the forum who are in the same situation as me. If anyone knows how to solve it, please ask for your advice

Re: Knock control under low speed and low load

Posted: Wed Jan 17, 2024 12:00 pm
by CalibratEd
Post the calibration and a datalog. I can take a look at it.

- Ed

Re: Knock control under low speed and low load

Posted: Wed Apr 10, 2024 2:44 pm
by Gamester
Hey guys, was anyone able to identify the exact cause and solution to this problem? I am facing the exact same issue in my 2016 turbo CVT and its driving me nuts ... pls help!