K-Pro V4 Wideband readings jumping up and down wildly
Posted: Fri Sep 08, 2023 9:55 am
Hi guys,
Having an issue with an AEM X Series Wideband / K-Pro v4. The air fuel ratios during WOT pulls are jumping up and down wildly. There's no STFT's, as ''no WOT compensation'' is selected, so it's not wideband feedback causing it. It's a brand new AFR gauge and sensor. Wired into Analog0 and set up in the calibration as such.
I've included a copy of the datalog as well as the calibration if anyone has any feedback.
Cheers guys
Having an issue with an AEM X Series Wideband / K-Pro v4. The air fuel ratios during WOT pulls are jumping up and down wildly. There's no STFT's, as ''no WOT compensation'' is selected, so it's not wideband feedback causing it. It's a brand new AFR gauge and sensor. Wired into Analog0 and set up in the calibration as such.
I've included a copy of the datalog as well as the calibration if anyone has any feedback.
Cheers guys