Hondata

Hi all,

Anyone has a base cal for just 5Psi WG pressure on:

JDM k24a RBB, 7700 rpm rev limit at the moment (stock)
Log manifold but with 45mm wastegate
45mm wastegate (GFB EX44) with 5psi spring
Gtx3582R
AN8 return fuel system with 450lph pump
AEM X-series on AN0

UK 97 pump gas (US beteeen 91-93)


Haven’t bought injectors yet but thinking of ID1050x? They are stock 310cc now.


I’ll upgrade to sidewinder later.

Alex,

When do you plan on getting your injectors? What map sensor are you running? I would not try to wide open throttle the car until you have the proper injectors.

Do you need something to drive it part throttle?

-Ed

Hi ed,

Injectors next week
Hondata 4 bar map sensor

I won’t be driving on stock injectors or stock map sensor :)

RoadsterAlex wrote: Wed May 03, 2023 12:27 pm Hi ed,

Injectors next week
Hondata 4 bar map sensor

I won’t be driving on stock injectors or stock map sensor :)

Sounds good.

What is your plan? Do you plan to dyno tune the car? Do you need something to get you to your tuner?

-Ed

Something I could drive around (not race around) untill I can get it tuned on the dyno.

They have a long waiting list unfortunately

I don’t use the car a lot but sometimes I do like city/motorway driving

RoadsterAlex wrote: Thu May 04, 2023 5:42 am Something I could drive around (not race around) untill I can get it tuned on the dyno.

They have a long waiting list unfortunately

I don’t use the car a lot but sometimes I do like city/motorway driving

Sounds good. Reach out when you have everything installed.

-Ed