2010 SI Looking for help on my tune!!!!!

[BigD]

I have a stock K20Z3 in my 2010 SI. Just a K&N Panel Filter. Getting knock on #2 mostly. Just looking for someone who might be bored and interested who can possibly help me along this tuning process. If this post picks up interest. I can follow up with a fresh datalog and the basemap tune im currently using. I look forward to learning from yall

[CalibratEd]

I have a stock K20Z3 in my 2010 SI. Just a K&N Panel Filter. Getting knock on #2 mostly. Just looking for someone who might be bored and interested who can possibly help me along this tuning process. If this post picks up interest. I can follow up with a fresh datalog and the basemap tune im currently using. I look forward to learning from yall

Welcome to the forum Big,

I would be more than happy to assist with any questions you may have.

-Ed

[BigD]

Mr. Ed,

Just now seeing this reply which is weird. I have given this car to my son and we will be installing a hybrid racing CAI possibly this weekend. I was able to find a decent tune a while back that the car is on now. Would you be available to potentially assist with some tuning if so? I look forward to hearing from you

[BigD]

Mr. Ed,

We finally got the hybrid intake installed. Its the only performance mod thats been done. The car has 226k miles lol. My son may add a header down the road. Its his daily driver so we wont be going to crazy with it unless we do a rebuild. The car is not too bad at the moment. I had to trim Cylinder 2 timing to -2 and trimmed off the knock like a champ. Let me know what you think. And anything we can do differently on the datalog for you. Its about 20 mins. A couple 3rd gear pulls. Some normal shift runs.And a handful of 123 pulls with vtec. Hope we gave you enough info

[CalibratEd]

Overall fueling is not bad. You are using one of EFICU's base maps so I'm not surprised. There are a few counts of knock so timing has to be reduced in those areas. The knock is mainly in the Vtec 40 degree VTC table.

- Ed

[CalibratEd]

I made some broad timing changes. Load the file and create a similar log. I want to see if the knock count was lowered after my adjustments.

- Ed

[BigD]

Thankyou very much brother!!!! We are installing some new headlights today on the civic and doing a little work on my 4 series beemer. We will load it up tonight and try a datalog if we have time. Its cooler today and rainy. Ill report back. Thanks again