Page 1 of 1
P1361 TDC Code, timing at -20 deg on startup.
Posted: Mon Apr 17, 2023 7:21 am
by Pro60modman
Powertrain is a K24A2/06+ Si trans in a 92 civic with a Kpro v2 installed. When the car starts it commands -20 degrees of ignition timing so the engine barely runs. It also is throwing P1361. I checked all of the wiring to the ECU and it tests good. Is the -20 degree timing at idle a sort of limp mode or is it something else?
Re: P1361 TDC Code, timing at -20 deg on startup.
Posted: Mon Apr 17, 2023 9:27 am
by Spunkster
You need to try the ECU on a known working vehicle and see if it gets the same error.
Re: P1361 TDC Code, timing at -20 deg on startup.
Posted: Mon Apr 17, 2023 11:00 am
by Pro60modman
It was previously installed in this same car without issue and 95 civic for about year until it was upgraded to a V4. I will test it again in the 95 really quick but as of two weeks ago it was running the 95 just fine.