Hondata

Hi Guys,

New to the world of Hondata and would like some advice on the differences between the 98RON UK base map and the wizard calibration that was created based on my build.

I cannot select a 98 or 99 octane in the wizard but can select everything else I need to add in regards to a PRL HVI with stock charge pip and Invidia R400 Gemini with Invidia Front Pipe, however when I look at the comparisons of this with the RON93 from the drop down and the 98RON UK base map I am seeing quite a few differences...

Would you suggest building from the wizard as I have and then manually making the changes in this calibration to that that are in the 98RON calibration? or will the wizard based created map with 93 Octane suffice without modification?

Thanks! :)

Should also add that I did look at both calibrations side by side and there are quite a few differences in the selections so am surprised that by just using the 98RON base map with no assumed other mods that it was that much more different (Performance increase wise) than the wizard build with the PRL and Invidia +FP

Ok, I looked into the octanes and the US octane levels need to be "converted" to UK values so it seems that 90/91 US Octane is more like 95 RON

Uploaded on that basis so will check the datalogs and see how that looks