Page 1 of 1
VSS PRB w/ 5speed
Posted: Wed Feb 08, 2023 5:17 am
by Yamasho
Kpro nood here.
Just installed on my 04 ep3 Canadian model
Basically stock with no performance mods yet
What can be done to make the hondata read my vss?
Re: VSS PRB w/ 5speed
Posted: Wed Feb 08, 2023 10:18 am
by Spunkster
What is the serial umber that is on the K-Pro board inside the ECU?
What is the ECU part number that is on the white plug inside the ECU?
Re: VSS PRB w/ 5speed
Posted: Wed Feb 08, 2023 11:15 am
by Yamasho
K-Pro4 50003
37820-PNF-A04
Re: VSS PRB w/ 5speed
Posted: Wed Feb 08, 2023 6:23 pm
by Spunkster
Post the calibration you are using as well as a datalog showing the issue made using that calibration.
Re: VSS PRB w/ 5speed
Posted: Fri Feb 10, 2023 8:29 am
by Yamasho
I'm using the calibration file for PNF stock k20a3
I am getting a warning message:
Calibration in the ECU is from an older version of KManager. Please re-upload the calibration before data logging.
Also error code P1298 ELD circuit high voltage.
Re: VSS PRB w/ 5speed
Posted: Fri Feb 10, 2023 9:38 am
by Yamasho
Okay im learning as i go here.
realized my issue. i wasn't properly uploading the tune to the ECU. all good now!
speed is reading! and yes i have a PNF and not a PRB.
Still learning about data logging.
here is one from today. any tips or video diys would be appreciated!
Thanks!