Kpro wont upload new tune requiring registration pls help!

K-Series Programmable ECU installation questions / support issues
Post Reply
keizeru369
Posts: 2
Joined: Tue Dec 20, 2022 7:59 am

Kpro wont upload new tune requiring registration pls help!

Post by keizeru369 »

Hi I am having and issue with my kpro it won't let me upload a new tune to the ecu. It requires me to register but the problem is the registration field is greyed out. I am connected to the Internet while doing this. Drivers have been updated and I have the 4.5.4 software. My ecu is kpro v2. I did eveything what was written in the troubleshooting thread. Aside from this I also noticed at the kpro tab in the software, the flash memory: 65mbit has an x mark. Any leads how to fix this? TIAImage
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kpro wont upload new tune requiring registration pls help!

Post by Spunkster »

Post a picture of the K-Pro board.
keizeru369
Posts: 2
Joined: Tue Dec 20, 2022 7:59 am

Re: Kpro wont upload new tune requiring registration pls help!

Post by keizeru369 »

Here's the pic
IMG_20230119_151905-min.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 23878
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Kpro wont upload new tune requiring registration pls help!

Post by Spunkster »

Send an email to support (at) hondata.com with the following and I will issue an RMA and give you further
instructions:

Name:
Address:
Phone:
Email:
Serial#:
Description of problem:

Include a link to this thread
aber0913
Posts: 7
Joined: Sun Nov 19, 2023 7:46 am

Re: Kpro wont upload new tune requiring registration pls help!

Post by aber0913 »

keizeru369 wrote: Wed Jan 18, 2023 1:02 am Hi I am having and issue with my kpro it won't let me upload a new tune to the ecu. It requires me to register but the problem is the registration field is greyed out. I am connected to the Internet while doing this. Drivers have been updated and I have the 4.5.4 software. My ecu is kpro v2. I did eveything what was written in the troubleshooting thread. Aside from this I also noticed at the kpro tab in the software, the flash memory: 65mbit has an x mark. Any leads how to fix this? TIAImage
Hi Keizeru369
Did you have this fixed? I just bought a used Kpro v3 and having same problems
Post Reply