Page 1 of 2
K pro not working
Posted: Sat Nov 12, 2022 7:05 pm
by MoeNyc
My k pro is stuck in limp mode. I tried in another car and also ran the same so I know it’s the k pro. I think I may shorted the ecu but I’m not sure board looks good to my eye. Is this fixable? Or do I have to get a new one? Please help
Re: K pro not working
Posted: Mon Nov 14, 2022 10:01 am
by Spunkster
What is the serial number that is on the K-Pro board inside the ECU?
From Help, About, what is the version of software you are using?
What errors are there when you datalog?
Re: K pro not working
Posted: Mon Nov 14, 2022 11:45 am
by MoeNyc
37820-PND-A07
2062-805298 of 06
And I get no errors because the ecu freezes setting on manager
Tried erasing ecu didn’t work
Ecu would start communicating to laptop with no key in ignition. K manager I assume was on last eat software because my mechanical reinstalled it. Not to sure what version.
Re: K pro not working
Posted: Mon Nov 14, 2022 12:15 pm
by Spunkster
What is the serial number that is on the K-Pro board inside the ECU?
From Help, About, what is the version of software you are using?
Re: K pro not working
Posted: Mon Nov 14, 2022 12:26 pm
by MoeNyc
Did I not give the right number? Where do I find that?
Re: K pro not working
Posted: Mon Nov 14, 2022 12:28 pm
by MoeNyc
It’s version 4.5.3.0
Re: K pro not working
Posted: Mon Nov 14, 2022 12:49 pm
by Spunkster
You still have not given the K-Pro serial number.
Re: K pro not working
Posted: Mon Nov 14, 2022 12:52 pm
by MoeNyc
2062-805298
Is it not that?
Re: K pro not working
Posted: Mon Nov 14, 2022 1:00 pm
by Spunkster
No that is not the serial number that is on the K-Pro board inside the ECU. That is the ECU part number.
Re: K pro not working
Posted: Mon Nov 14, 2022 1:06 pm
by MoeNyc
I see T1Y-D3
Is it that?
Re: K pro not working
Posted: Mon Nov 14, 2022 1:11 pm
by MoeNyc
Found it it’s 58671
Re: K pro not working
Posted: Mon Nov 14, 2022 1:35 pm
by Spunkster
What vehicle is this being used on?
Re: K pro not working
Posted: Mon Nov 14, 2022 1:44 pm
by MoeNyc
2005 base model rsx
Re: K pro not working
Posted: Mon Nov 14, 2022 1:53 pm
by Spunkster
What have you done that makes you think you may have shorted the ECU?
Re: K pro not working
Posted: Mon Nov 14, 2022 1:58 pm
by MoeNyc
I was testing voltage to the speed sensor seeing if anything went out because it was raining bad and I got a cel for speed sensor malfunctioning