Page 1 of 1
boost not stable, bouncing at high rpm
Posted: Sat Sep 17, 2022 9:51 pm
by john1182
hi i am having problems with my boost not stable bouncing from 11 to 12, i have set my 4th gear @ 13psi and quick spool 2 psi lower than that.Help please..
Re: boost not stable, bouncing at high rpm
Posted: Sat Sep 17, 2022 10:27 pm
by john1182
do i have to set quickspool to my commanded boost? because iam noticing that if the boost hits the quickspool it returned to 48% pwm from 100% and comes back if its below quickspool
Re: boost not stable, bouncing at high rpm
Posted: Mon Sep 19, 2022 10:34 am
by Spunkster
You have not posted the calibration the datalog was made with.